root@NHX6018-0-NPN-256M32-D4:/# iw
Usage: iw [options] command
--debug enable netlink debugging
--version show version (5.9)
phy <phyname> coalesce show
phy <phyname> coalesce disable
phy <phyname> coalesce enable <config-file>
dev <devname> auth <SSID> <bssid> <type:open|shared> <freq in MHz> [key 0:abcde d:1:6162636465]
dev <devname> connect [-w] <SSID> [<freq in MHz>] [<bssid>] [key 0:abcde d:1:6162636465] [mfp:req/opt/no]
dev <devname> cqm rssi <threshold|off> [<hysteresis>]
dev <devname> ftm start_responder [lci=<lci buffer in hex>] [civic=<civic buffer in hex>]
dev <devname> ftm get_stats
phy <phyname> hwsim wakequeues
phy <phyname> hwsim stopqueues
phy <phyname> hwsim setps <value>
phy <phyname> hwsim getps
dev <devname> ibss join <SSID> <freq in MHz> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]
dev <devname> switch channel <channel> [6G] [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons <count>] [block-tx]
dev <devname> switch freq <freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons <count>] [block-tx]
dev <devname> switch freq <control freq> [5|10|20|40|80|80+80|160] [<center1_freq> [<center2_freq>]] [beacons <count>] [block-tx]
dev <devname> interface add <name> type <type> [mesh_id <meshid>] [4addr on|off] [flags <flag>*] [addr <mac-addr>]
phy <phyname> interface add <name> type <type> [mesh_id <meshid>] [4addr on|off] [flags <flag>*] [addr <mac-addr>]
dev <devname> measurement ftm_request <config-file> [timeout=<seconds>] [randomise[=<addr>/<mask>]]
dev <devname> mesh join <mesh ID> [[freq <freq in MHz> <NOHT|HT20|HT40+|HT40-|80MHz>] [basic-rates <rate in Mbps,rate2,...>]], [mcast-rate <rate in Mbps>] [beacon-interval <time in TUs>] [dtim-period <value>] [vendor_sync on|off] [<param>=<value>]*
dev <devname> mgmt dump frame <type as hex ab> <pattern as hex ab:cd:..> [frame <type> <pattern>]* [count <frames>]
dev <devname> mpath set <destination MAC address> next_hop <next hop MAC address>
dev <devname> mpath new <destination MAC address> next_hop <next hop MAC address>
dev <devname> mpath del <MAC address>
dev <devname> mpath get <MAC address>
dev <devname> mpath probe <destination MAC address> frame <frame>
dev <devname> mpp get <MAC address>
wdev <idx> nan add_func type <publish|subscribe|followup> [active] [solicited] [unsolicited] [bcast] [close_range] name <name> [info <info>] [flw_up_id <id> flw_up_req_id <id> flw_up_dest <mac>] [ttl <ttl>] [srf <include|exclude> <bf|list> [bf_idx] [bf_len] <mac1;mac2...>] [rx_filter <str1:str2...>] [tx_filter <str1:str2...>]
wdev <idx> nan rm_func cookie <cookie>
wdev <idx> nan config [pref <pref>] [bands [2GHz] [5GHz]]
wdev <idx> nan start pref <pref> [bands [2GHz] [5GHz]]
dev <devname> ocb join <freq in MHz> <5MHz|10MHz>
dev <devname> offchannel <freq> <duration>
dev <devname> cac channel <channel> [6G] [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
dev <devname> cac freq <freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
dev <devname> cac freq <control freq> [5|10|20|40|80|80+80|160] [<center1_freq> [<center2_freq>]]
dev <devname> cac trigger channel <channel> [6G] [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
dev <devname> cac trigger freq <frequency> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
dev <devname> cac trigger freq <frequency> [5|10|20|40|80|80+80|160] [<center1_freq> [<center2_freq>]]
reg set <ISO/IEC 3166-1 alpha2>
dev <devname> roc start <freq> <time in ms>
dev <devname> scan [-u] [freq <freq>*] [HT40+|HT40-|80MHz] [duration <dur>] [ies <hex as 00:11:..>] [meshid <meshid>] [lowpri,flush,ap-force,duration-mandatory] [randomise[=<addr>/<mask>]] [ssid <ssid>*|passive]
dev <devname> scan sched_stop
dev <devname> scan sched_start [interval <in_msecs> | scan_plans [<interval_secs:iterations>*] <interval_secs>] [delay <in_secs>] [freqs <freq>+] [matches [ssid <ssid>]+]] [active [ssid <ssid>]+|passive] [randomise[=<addr>/<mask>]]
dev <devname> scan trigger [freq <freq>*] [HT40+|HT40-|80MHz] [duration <dur>] [ies <hex as 00:11:..>] [meshid <meshid>] [lowpri,flush,ap-force,duration-mandatory] [randomise[=<addr>/<mask>]] [ssid <ssid>*|passive]
dev <devname> scan dump [-u]
dev <devname> set bitrates [legacy-<2.4|5> <legacy rate in Mbps>*] [ht-mcs-<2.4|5> <MCS index>*] [vht-mcs-<2.4|5> [he-mcs-<2.4|5|6> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5] [he-gi-<2.4|5|6> <0.8|1.6|3.2>] [he-ltf-<2.4|5|6> <1|2|4>] [he-ul-mcs-<2.4|5> <NSS:MCS>]
dev <devname> set tidconf [peer <MAC address>] tids <mask> [override] [sretry <num>] [lretry <num>] [ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts [on|off]][bitrates <type [auto|fixed|limit]> [legacy-<2.4|5> <legacy rate in Mbps>*] [ht-mcs-<2.4|5> <MCS index>*] [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]]
dev <devname> set tid_aggr_conf tid <tid> <[peer <MAC address>] aggr on|off>
dev <devname> set tid_retry_count tid <tid> <[peer <MAC address>] short <limit> long <limit>]>
dev <devname> set mcast_rate <rate in Mbps>
dev <devname> set peer <MAC address>
dev <devname> set noack_map <[peer <addr>] [map]>
dev <devname> set 4addr <on|off>
dev <devname> set type <type>
dev <devname> set meshid <meshid>
dev <devname> set monitor <flag>*
dev <devname> set mesh_param <param>=<value> [<param>=<value>]*
phy <phyname> set txq limit <packets> | memory_limit <bytes> | quantum <bytes>
phy <phyname> set antenna_gain <antenna gain in dBm>
phy <phyname> set antenna <bitmap> | all | <tx bitmap> <rx bitmap>
dev <devname> set txpower <auto|fixed|limit> [<tx power in mBm>]
phy <phyname> set txpower <auto|fixed|limit> [<tx power in mBm>]
phy <phyname> set distance <auto|distance>
phy <phyname> set coverage <coverage class>
phy <phyname> set netns { <pid> | name <nsname> }
phy <phyname> set retry [short <limit>] [long <limit>]
phy <phyname> set rts <rts threshold|off>
phy <phyname> set frag <fragmentation threshold|off>
dev <devname> set channel <channel> [6G] [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [6G]
phy <phyname> set channel <channel> [6G] [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
dev <devname> set freq <freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
dev <devname> set freq <control freq> [5|10|20|40|80|80+80|160] [<center1_freq> [<center2_freq>]]
phy <phyname> set freq <freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
phy <phyname> set freq <control freq> [5|10|20|40|80|80+80|160] [<center1_freq> [<center2_freq>]]
phy <phyname> set name <new name>
dev <devname> set power_save <on|off>
dev <devname> get mesh_param [<param>]
dev <devname> get power_save <param>
dev <devname> station dump [-v]
dev <devname> station set <MAC address> txpwr <auto|limit> [<tx power dBm>]
dev <devname> station set <MAC address> airtime_weight <weight>
dev <devname> station set <MAC address> mesh_power_mode <active|light|deep>
dev <devname> station set <MAC address> vlan <ifindex>
dev <devname> station set <MAC address> plink_action <open|block>
dev <devname> station del <MAC address> [subtype <subtype>] [reason-code <code>]
dev <devname> station get <MAC address>
dev <devname> survey dump
dev <devname> vendor recvbin <oui> <subcmd> <filename|-|hex data>
dev <devname> vendor recv <oui> <subcmd> <filename|-|hex data>
dev <devname> vendor send <oui> <subcmd> <filename|-|hex data>
phy <phyname> wowlan show
phy <phyname> wowlan disable
phy <phyname> wowlan enable [any] [disconnect] [magic-packet] [gtk-rekey-failure] [eap-identity-request] [4way-handshake] [rfkill-release] [net-detect [interval <in_msecs> | scan_plans [<interval_secs:iterations>*] <interval_secs>] [delay <in_secs>] [freqs <freq>+] [matches [ssid <ssid>]+]] [active [ssid <ssid>]+|passive] [randomise[=<addr>/<mask>]]] [tcp <config-file>] [patterns [offset1+]<pattern1> ...]
Commands that use the netdev ('dev') can also be given the
'wdev' instead to identify the device.
You can omit the 'phy' or 'dev' if the identification is unique,
e.g. "iw wlan0 info" or "iw phy0 info". (Don't when scripting.)
Do NOT screenscrape this tool, we don't consider its output stable.
root@NHX6018-0-NPN-256M32-D4:/#
